Refrigeration compressor repair and maintenance methods
in General discussion
Sun Nov 26, 2017 9:20 pm
• 226 Posts | 2524 Points
Refrigeration compressor repair and maintenance methods Refrigeration compressors are the heart and heart of refrigeration systems. The ability and characteristics of the compressor to be introduced determine the capabilities and characteristics of the refrigeration system. Therefore, the refrigeration industry all over the world has invested a lot of energy in the research of refrigeration compressors, new research directions and mini industrial peanut butter machine factory sell research results continue to emerge, the compressor technology and performance level with each passing day. So how to maintain the refrigeration compressor in daily use? , Often check the motor with or without debris or even conductive objects, the coil has been damaged, the stator, the rotor has friction, or the motor will burn the motor after starting; Note constant temperature and humidity chamber compressor and its equipment and environment Hygienic Periodically sweep the ash on the compressor condenser as too much dust builds can cause overpressure or uncooled failure of the equipment. Observe whether the oil level in the body sump and the lubricant in the lubricator are below Tick should be promptly added if the line is low (oil foot shall be stopped for inspection), carefully check the action sound of the cylinder and the moving parts at all levels of the constant temperature and humidity chamber According to "listen" to identify whether its work is normal, if Found unusual sound immediately shut down to check; the use of lubricants to precipitation filter. Winter and summer compressor oil to be used differently. 2017 peanut butter machine production equipment , If the water-cooled compressor can not immediately access to water after the water is cut off to avoid uneven cylinder of hot and cold cylinder cracks occur after parking in winter to let off the cooling water to avoid cracks and other air-cooled cylinder air compression as long as the indoor temperature is not suddenly cold Heat can be the best factory proposal is let go in the standard laboratory with air conditioning temperature can be constant at a suitable temperature.